Becoming a DJI developer is easy. Please see here for details.
All documentation can be found on the DJI developer website.
The SDK can be downloaded from the website .
All sample code referenced in the tutorials is available on Github .
Tutorials of Windows SDK are available here Windows SDK Tutorials.
You can use the following methods to get help:
Post questions in StackOverFlow with DJI SDK tag: dji-sdk
If you prefer email, please send to email@example.com for help.
The following link of the documentation can help:
Yes, you can use a USB cable to connect between DJI Products and your computer to access the SD card data directly. Each product's manual illustrates the location of the USB port on the product.
Each product's web page at www.dji.com has a firmware installation manual in the Downloads section.
The aircraft is in Travel Mode during delivery. In this mode, the landing gear is half way between the retracted (up) and deployed (down) state. The landing gear needs to be deployed to attach a camera. Follow these steps to deploy the landing gear (put the aircraft in Landing Mode):
- If you have purchased the dual remote controller version, you must use the Master remote controller to deactivate Travel Mode.
- Be sure to remove the camera from the aircraft before switch from Landing Mode to Travel Mode.
- The ultrasonic sensor underneath the aircraft is used to determine when the landing gear is at the right position. Smooth reflective surfaces will work better than rough, sound-absorbing surfaces (e.g. carpet).
DJI products use WGS84 as the coordinate system.